Pendulum Bucket Elevator Manufacturer

 

Jinghang designs and manufactures customized Pendulum Bucket Elevators for the gentle vertical and horizontal conveying of granular, pelletized and other free-flowing bulk materials.

Also known as a Pendulum Bucket Conveyor, Tilting Bucket Elevator or Oscillating Bucket Elevator, this conveying system keeps the buckets in a stable position during transportation and tips them only at the selected discharge point. This helps reduce unnecessary impact, product breakage, segregation, dust and material loss.

Rather than offering only one fixed machine layout, Jinghang provides Z-type, C-type, T-type, multi-inlet and multi-outlet configurations. The conveying route, lifting height, horizontal distance, number of feeding points and number of discharge points can be designed around your production process and available factory space.

 

Pendulum Bucket Elevator Configurations

 

Z-Type Pendulum Bucket Elevator

The Z-Type Pendulum Bucket Elevator is generally the most direct configuration for transferring material from a low-level feeding point to an elevated processing, weighing, storage or packaging machine.

The Z-type arrangement is suitable when the inlet and outlet are located on opposite sides of the vertical section and the production line requires a straightforward floor-to-height transfer.

Choose a Z-type system when:

• There is one main low-level feeding point
• Material needs to be lifted to one primary high-level destination
• The upper horizontal distance is relatively short
• A compact and uncomplicated conveying route is preferred
• The machine will feed a packaging machine, multihead weigher, silo or processing unit
• Only a small number of adjacent discharge positions are required

A Z-type elevator may also be designed with several discharge points along the upper horizontal section. For a production line requiring a larger number of independently controlled outlets, a dedicated multi-outlet configuration is generally more appropriate.

C-Type Pendulum Bucket Elevator

The C-Type Pendulum Bucket Elevator combines vertical lifting with an extended horizontal conveying route in a continuous system.

It is suitable for factory layouts where the material must travel horizontally before or after lifting, or where the discharge position cannot be reached by a simple Z-shaped route.

Choose a C-type system when:

• The inlet and outlet arrangement requires a return-side or extended conveying route
• The factory contains columns, platforms or existing machines that must be avoided
• A longer horizontal section is needed
• The new elevator must be integrated into an existing production line
• One system is expected to replace a separate horizontal conveyor and vertical elevator
• Additional flexibility is required in positioning the discharge point

Because the final C-shaped route depends heavily on the actual plant arrangement, customers should provide a layout drawing showing the feeding point, required elevation, outlet position and surrounding equipment.

T-Type Pendulum Bucket Elevator

The T-Type Pendulum Bucket Elevator is designed for centralized lifting followed by material distribution in two horizontal directions.

After the material reaches the upper section, the conveying path extends to the left and right. This enables one lifting system to connect with multiple downstream machines, storage points or production areas.

Choose a T-type system when:

• One material source must feed two production directions
• Downstream machines are positioned on both sides of the vertical lifting section
• Two or more silos or packaging areas need to share one elevator
• Left and right horizontal sections need different lengths
• A centralized lifting and branched distribution layout is required
• The production line requires automated selection of different discharge destinations

The left and right sections can be designed according to the plant layout. The required outlet quantity, outlet spacing and discharge sequence should be confirmed before production.

Multi-Outlet Pendulum Bucket Elevator

The Multi-Outlet Pendulum Bucket Elevator is designed to lift material once and distribute it to several downstream destinations.

Multiple independently arranged discharge points can be installed along the upper conveying section. According to the control design, the system can direct material to selected storage silos, buffer hoppers, weighing machines, mixers or packaging machines.

Choose a multi-outlet system when:

• One material source needs to supply several downstream machines
• Multiple silos or storage bins are arranged along one conveying route
• Different packaging machines share the same upstream material
• The selected outlet needs to change during production
• A separate elevator for every downstream machine would occupy too much space
• The production process requires sequential or automatic material distribution

Important information for multi-outlet system design includes:

• Total number of outlets
• Distance between outlets
• Outlet elevation
• Required discharge sequence
• Whether one or several outlets operate at the same time
• Required flow rate at each outlet
• Downstream hopper capacity
• Level sensor or PLC communication requirements
• Cleaning requirements between production batches

Jinghang can supply multi-outlet systems in different conveying layouts. Pneumatic, mechanical or automated discharge control can be evaluated according to the application.

Multi-Inlet Pendulum Bucket Elevator

The Multi-Inlet Pendulum Bucket Elevator collects material from two or more upstream feeding positions and transfers it through one common conveying route.

Multiple inlet points are normally arranged along the lower horizontal section. This configuration can reduce the number of separate collection conveyors required between upstream processing machines and the main elevator.

Choose a multi-inlet system when:

• Several upstream machines discharge into one conveying line
• Material must be collected from multiple processing positions
• Several floor-level feeding points share one downstream destination
• The factory wants to reduce the number of independent conveyors
• The inlet sequence needs to be coordinated automatically
• Multiple batches of the same material need to be consolidated

Multi-inlet systems require careful feeding control. The combined feeding rate must not exceed the available bucket capacity, and each inlet may require an independently controlled feeder or gate.

When different materials are introduced through separate inlets, their compatibility, production sequence and cross-contamination risk must be evaluated. A multi-inlet elevator should not automatically be considered suitable for mixing unrelated materials.

 

Which Configuration Should You Choose?

 

Choose the Z-Type Pendulum Bucket Elevator when you need a relatively direct route from one low-level feeding point to one elevated destination.

Choose the C-Type Pendulum Bucket Elevator when the conveyor must follow a longer or more complex horizontal and vertical route.

Choose the T-Type Pendulum Bucket Elevator when material needs to be lifted centrally and then distributed in two directions.

Choose the Multi-Outlet Pendulum Bucket Elevator when one material source must supply multiple downstream silos, hoppers, processing machines or packaging stations.

Choose the Multi-Inlet Pendulum Bucket Elevator when several upstream machines or feeding points need to share one conveying system.

For complex projects involving multiple inlets and outlets, Jinghang can develop a customized conveying route and control strategy based on the process flow rather than limiting the project to one standard configuration.

 

Why Use a Pendulum Bucket Elevator？

 

Gentle Material Handling

The suspended buckets remain stable while moving through horizontal, vertical and corner sections. Material is discharged by controlled bucket tilting rather than high-speed centrifugal throwing.

This conveying method is particularly useful when reducing breakage, abrasion, dust or product segregation is important.

Horizontal and Vertical Conveying in One System

A Pendulum Bucket Conveyor can combine lower horizontal collection, vertical lifting and upper horizontal distribution.

This may reduce the need for separate horizontal conveyors, transfer chutes and vertical elevators.

Flexible Inlet and Outlet Arrangement

Depending on the selected configuration, the system can be designed for:

• Single inlet and single outlet
• Single inlet and multiple outlets
• Multiple inlets and single outlet
• Multiple inlets and multiple outlets
• Left and right distribution
• Outlets at different positions or elevations

Enclosed Conveying

An enclosed casing can help contain dust and protect the conveyed material from the surrounding production environment.

 

Typical Materials

 

Pendulum Bucket Elevators are generally selected for free-flowing granular, pelletized and small bulk materials requiring gentle transportation and controlled discharge.

Typical categories include:

• Grain, seed and pulses
• Food ingredients and snack products
• Animal feed and pet food
• Plastic pellets and masterbatch
• Chemical and fertilizer granules
• Pharmaceutical or other sensitive granular products

 

Custom Pendulum Bucket Elevator Options

 

Jinghang can customize the system according to your material, capacity and production-line layout.

Conveying Route

Available configurations include:

• Z-type
• C-type
• T-type
• Multi-inlet
• Multi-outlet
• Combined customized routes

Bucket Configuration

Bucket selection can be adjusted according to:

• Material particle size
• Required capacity
• Bulk density
• Product fragility
• Food-contact requirements
• Abrasion level
• Cleaning method

Inlet Design

Inlet customization may include:

• Single feeding point
• Multiple feeding points
• Independent inlet gates
• Controlled feeding sequence
• Connection with vibratory feeders
• Connection with upstream conveyors
• Level or blockage monitoring

Outlet Design

Outlet customization may include:

• Single fixed outlet
• Multiple fixed outlets
• Selectable discharge stations
• Pneumatic tipping control
• Mechanical tipping control
• PLC-controlled outlet selection
• Connection chutes and transition hoppers

 

Supporting Material Handling Equipment

 

For projects requiring further material routing after elevation, the Pendulum Bucket Elevator can be combined with a Material Distribution Machine.

For dusty materials or production environments requiring additional dust management, the system can also be evaluated together with suitable Dust Collector equipment.

This allows the lifting, distribution and dust-control requirements to be considered as part of one material-handling process rather than as unrelated machines. Jinghang’s website lists pendulum bucket elevators, material distribution machines and dust collectors as its main equipment categories.

 

Frequently Asked Questions

 

Q:Can one Pendulum Bucket Elevator have multiple inlets and outlets?

Yes, but the feeding capacity, outlet logic, material compatibility and cleaning requirements must be evaluated carefully.

A multi-inlet and multi-outlet system normally requires customized mechanical design and PLC control.

Q:Can different materials use the same multi-inlet elevator?

It depends on whether the materials can be mixed and whether the system can be cleaned sufficiently between batches.

For materials with strict cross-contamination controls, separate conveying systems may be more appropriate.

Q:Which configuration is best for feeding several packaging machines?

A Multi-Outlet Pendulum Bucket Elevator is usually the first configuration to evaluate when several packaging machines are positioned along one conveying route.

A T-Type Pendulum Bucket Elevator may be more suitable when the packaging machines are divided into two different directions.

 

Request a Custom Pendulum Bucket Elevator Solution

 

Not sure whether your production line requires a Z-type, C-type, T-type, multi-inlet or multi-outlet configuration?

Send Jinghang your material data and plant layout. Our engineering team will evaluate the complete conveying route and recommend a system.

Contact Jinghang to request a configuration recommendation, layout proposal and quotation for your custom Pendulum Bucket Elevator.